Your height is a starting point for choosing an e-bike, not a complete fit assessment. A published rider-height range helps you shortlist a model. It does not tell you, on its own, how the saddle, pedals, handlebars and controls will suit you.
That distinction matters when comparing Black Friday offers online. The practical task is to turn a broad height recommendation into a few specific questions before ordering. You can collect useful information without guessing a frame size or making adjustments to a bicycle you have not tried.
Start with your measurements, not a remembered clothing size
Measure your height rather than relying on an old estimate, and record the unit. Also obtain an inside-leg measurement using the method requested by the manufacturer or fitter. A trouser-size label is not a record of how a bicycle-sizing measurement was taken.
Trek's road-bike sizing guidance uses both height and inseam. That illustrates why one body measurement is not the whole enquiry; its road-bike size recommendations should not be transferred to a TTGO city or folding e-bike.
For a clear measurement record, note whether you measured barefoot, how you took the inside-leg measurement and whether someone helped. Trek's published measuring instructions use barefoot standing measurements. Follow a consistent method and repeat an uncertain reading instead of rounding it to make a chart fit. Ask for help if you cannot take the measurement comfortably or reliably.

Two bikes can publish the same height range
On 17 November 2026, TTGO's pages for the C3 SE in White and F7 in Off White both listed a rider height of 165–195 cm. Those are manufacturer-listed recommendations, not results from an independent fitting session.
The matching ranges do not make the bicycles interchangeable. The C3 SE and F7 have separate model pages and separate Size and Fit diagrams. Use each model's own information to ask about its riding position and available adjustment, rather than assuming that being inside both ranges means both will feel the same.

If you are close to a boundary, do not treat the printed endpoint as a personalised guarantee. If you fall outside a published recommendation, do not assume a longer or shorter seat post will solve the mismatch. Ask TTGO about the exact model and your measurements before committing to it.
Compare measurements only when their definitions match
A dimension is useful only when you know what it measures. Both TTGO example pages list a seat-height range and other dimensions, but a label alone is not a complete measurement method. Before comparing a figure with your body or another bike, identify the start point, end point and direction in the diagram, or ask TTGO to clarify them.
| Information you have | What to establish before using it |
|---|---|
| Your overall height | Use it against the exact model's rider-height recommendation, with the same unit. |
| Your inside-leg measurement | Record the measuring method and ask how it informs that model's fit assessment. |
| A listed seat-height range | Confirm its measurement endpoints and the permitted adjustment conditions. |
| A handlebar or frame dimension | Check what the line actually spans; do not assume it equals the distance your hands must reach. |
For example, a bicycle measurement taken from the floor and a body measurement taken from the crotch to the floor describe different things. Subtracting one from the other does not automatically produce a safe saddle setting. This guide therefore does not turn either model's seat-height figures into a suggested adjustment.

Use your present bike as a reference, not a fitting formula
If you already ride a bicycle comfortably, record its exact model and what you like about the position. If it does not suit you, describe the problem instead: reaching the grips feels awkward, a control is difficult to operate, or you struggle with the stopping routine. These observations are more useful than saying only that you want something smaller.
Share any comparison measurements with their endpoints clearly described. A photograph can help explain which points you mean, but it cannot establish the correct position for a different bicycle. Do not copy a saddle or handlebar setting merely because two bikes have a similar appearance.
Keep access and riding position separate. Our step-through commuting guide covers the mounting and daily-use decision. A frame opening that is easy to step through does not answer the remaining questions about sitting, pedalling and operating the controls.
Resolve the fit question before planning adjustments
Where a suitable demonstration or fitting opportunity is available, arrange it with someone who can help you assess the exact bike. Ask about the position at the saddle, access to the grips and brakes, and getting on and stopping. A similar-looking demonstration bike is not confirmation of the fit of another model.
Use the relevant TTGO model manual for permitted adjustments and preparation. The C3 SE manual separately covers seat-post setup and before-riding checks. Do not assume an adjustable part has unlimited travel, or plan a component swap as a guaranteed fix. Seek qualified help when the adjustment or result is unclear.

If you cannot try the model, keep unresolved points visible. Ask for clarification rather than deciding that a discount makes an uncertain fit acceptable. Read the current Return Policy before depending on a return as your fallback; do not assume it provides a free fitting trial.
Send a focused sizing enquiry
Send TTGO support the full model and variant, your destination country, height and measured inside-leg length. Include how you measured, the riding position you want, a useful current-bike reference and the exact dimension or adjustment you need clarified.
Ask: “How should I interpret this model's height recommendation for my measurements? Which diagram dimensions and permitted adjustments should I check? Is there anything that still needs an in-person assessment?” A written answer helps you identify the next check; it is not a substitute for assessing how the bicycle actually works for you.
Once the fit questions are resolved, the current code ttgo offers 10% off one-time purchases. Our Black Friday code guide explains the offer. Choose an available variant that suits your needs, then check the current discount and order total.
On the product pages, select the named colour or accessory style and confirm that selection in your order before paying.
Model information checked on 17 November 2026. Height ranges are manufacturer guidance, not individual fit approvals. Illustrations explain the questions; product photographs are original TTGO images.


Share:
Will Your Black Friday E-Bike Arrive Ready to Ride?
Can TTGO Deliver Your Black Friday E-Bike to Your Address?